AQUATHANE PRIMER/SEALER is designed specifically for use on new or refurbished wood floors where the desire is to retain the natural appearance of the wood. This is particularly useful for woods such as White Oak, Ash, or clear grades of Maple, Beech and other light hardwoods.

AQUATHANE PRIMER/SEALER is also recommended for minimizing grain raising on open grained or porous wood, prior to application of Aquathane Super or Aquathane Super Sport polyurethane finishes.

AQUATHANE PRIMER/SEALER offers the following advantages to the specifier/user:

Fast drying (approximately I hour)

Low odour

Reduces risk of shrinkage, cracking and rafting of

new wood

Easy to apply

DRYING TIME
Approximately 1 hour at 20 degree C room temperature 50% relative humidity and good ventilation.

COVERAGE
10 - 12 square metres per litre approximately, depending on porosity of surface.

AQUATHANE SUPER is a one component polyurethane acrylate finish formulated specifically for new or refurbished hardwood strip, block mosaic and cork flooring subject to heavy wear. Aquathane Super can also be used successfully on most factory pre-finished floors providing the surface is cleaned and a suitable 'key' is created using appropriate grade of sandscreen disc or paper (trial before use).

AQUATHANE SUPER offers the following advantages to the specifier or user.

Excellent flexibility, particularly on cork flooring.

Suitable for use in domestic, commercial, retail and educational establishments.

Very hard wearing finish.

Low odour.

Low volatile organic compounds (V.O.C.) emissions.

Fast drying and rapid recoating time. (1 - 2 hours)

Excellent resistance to most common chemicals.

Extremely easy to apply.

Available in Gloss, Silk or Satin finish.

DRYING TIME
Approximately 1-2 hours at 20'C room temperature 50% relative humidity and good ventilation.

COVERAGE
16 - 20 square metres per litre approximately, depending on porosity of surface.

AQUATHANE PRIMER/SEALER is designed specifically for use on new or refurbished wood floors where the desire is to retain the natural appearance of the wood. This is particularly useful for woods such as White Oak, Ash, or clear grades of Maple, Beech and other light hardwoods.

AQUATHANE PRIMER/SEALER is also recommended for minimizing grain raising on open grained or porous wood, prior to application of Aquathane Super or Aquathane Super Sport polyurethane finishes.

AQUATHANE PRIMER/SEALER offers the following advantages to the specifier/user:

Fast drying (approximately I hour)

Low odour

Reduces risk of shrinkage, cracking and rafting of

new wood

Easy to apply

DRYING TIME
Approximately 1 hour at 20 degree C room temperature 50% relative humidity and good ventilation.

COVERAGE
10 - 12 square metres per litre approximately, depending on porosity of surface.

AQUATHANE SUPER is a one component polyurethane acrylate finish formulated specifically for new or refurbished hardwood strip, block mosaic and cork flooring subject to heavy wear. Aquathane Super can also be used successfully on most factory pre-finished floors providing the surface is cleaned and a suitable 'key' is created using appropriate grade of sandscreen disc or paper (trial before use).

AQUATHANE SUPER offers the following advantages to the specifier or user.

Excellent flexibility, particularly on cork flooring.

Suitable for use in domestic, commercial, retail and educational establishments.

Very hard wearing finish.

Low odour.

Low volatile organic compounds (V.O.C.) emissions.

Fast drying and rapid recoating time. (1 - 2 hours)

Excellent resistance to most common chemicals.

Extremely easy to apply.

Available in Gloss, Silk or Satin finish.

DRYING TIME
Approximately 1-2 hours at 20'C room temperature 50% relative humidity and good ventilation.

COVERAGE
16 - 20 square metres per litre approximately, depending on porosity of surface.